Replacement Silicone Shield - 24mm or 27mm - Original / Baby Owl
Breast pump parts don’t require sterilisation, as they only come into contact with breast milk, which is already sterile. Frequent sterilisation can cause parts to deteriorate, discolour, and even warp if exposed to heat over 100°C, leading to more frequent replacements.
Unless advised otherwise by your healthcare provider, we recommend cleaning with warm soapy water and a soft cloth or brush. Be sure all parts are fully dry before use.
For more ways to care for your pump parts and maximise their lifespan, check out our tips below.
Here are our recommended time frames for upgrading each part.
Please keep in mind, these are general guidelines, not strict rules or guarantees.
The lifespan of the parts will ultimately depend on factors like usage, care, cleaning methods, the efficiency of cleaning, storage, and heat exposure.
Original Night Owl & Baby Owl:
- Shield: 2-3 months
- Valve: 1-2 months
- Diaphragm: 1-2 months
- Flange inserts: 1-2 months
- Linker: 2-3 months
Mumma Owl:
- Valve: Approximately 1.5 - 2.5 months, or as needed if it shows signs of wear.
- All other parts: Approximately 2-3 months, or as needed if they show signs of wear.
Here are some tips to help maximise the life of your breast pump parts:
Check parts: Regularly check parts for signs of wear and replace them as needed to keep everything running smoothly.
Use gentle cleaning methods: Opt for mild detergents and avoid scrubbing too hard. A soft sponge or cloth works well, avoid bottle brushes to prevent any tears or fraying. Do not use a dishwasher.
Clean after each use: Ensure parts are cleaned thoroughly after every use to prevent milk residue build-up and bacteria build-up that weakens materials over time.
Ensure thorough but gentle cleaning: Clean parts thoroughly after each use to avoid milk residue build-up, which can affect their performance over time.
If sterilising, be gentle: When sterilising, avoid extreme high-heat methods like microwaving or boiling for long periods, as these can cause warping. If possible, use warm water or sterilising solutions to keep parts in good condition.
Store properly: Keep parts in a dry, cool area, away from direct sunlight or damp environments to prevent accelerating wear and tear.
Handle with care: Be gentle when assembling or disassembling parts to avoid unnecessary strain, which can lead to damage over time.
Sterilise thoughtfully: If you choose to sterilise the parts, limit frequent sterilisation if possible to help parts last longer.
Avoid harsh chemicals: Stick to baby-safe cleaning products to protect the materials from breaking down.
Limit soaking time: Avoid leaving parts soaking in water or cleaning solutions, to prevent weakening.
By following these tips, you'll help ensure your pump parts stay in better shape for longer!
Collapsible tab content
No. Most dishwashers operate at over 100° which can be harmful to your parts. This may cause them to discolour, warp or deteriorate and require replacing faster.
We recommend simply warm soapy water with a soft cloth or brush.
The Night Owl ship from Melbourne, Australia. We ship both within Australia and to New Zealand.
Your order will be dispatched within 1-2 business days.
Free Standard Shipping is available on all orders over $99 to Australia or New Zealand!
You can track your order after a shipping confirmation email has been sent to you with a tracking number.
For further information on shipping policies click here
Why do Mums love us so much?
Your questions answered
How do they work?
Our wearable breast pumps fit inside your bra so your completely hands free and mobile while pumping. Visit our 'How it works' page for a step by step guide on everything you need to know about The Night Owl wearable breast pumps!
How do I know if they will fit me?
Our wearable pumps were designed to fit inside most standard nursing or maternity bras so your cup size won't affect how it works. As long as it's centered and pressed firmly against your breast with no gaps you're good to go!
The most important fit is your nipple diameter so head over to our fitting guide to ensure you get the correct size flange. Visit our 'fitting guide' for more information
I have larger breasts, will they still work?
Yes absolutely! The Night Owl wearable pumps were designed to fit any breast size.
Can I exclusively use a wearable pump for pumping?
You can absolutely use The Night Owl wearable breast pumps to exclusively pump. Our pumps are designed to cater to the diverse needs of breastfeeding mothers, including those who choose to exclusively pump. Please keep in mind not all wearable breast pumps on the market are suitable for exclusive pumping.
We understand the importance of a reliable and efficient pump for exclusively pumping, and we're here to reassure you that our pumps are up to the task both performance and durability wise. These pumps have been carefully crafted with a focus on motor performance, comfort and durability, ensuring a consistent and effective pumping experience.
It is a common misconception that ALL wearable breast pumps are not "as good" as other pumps as they "aren't strong enough". Although this may be true for some, this isn't true in our case. The strength in our wearable pump motors is actually higher than most average breast pumps out there in the market.
Which pump is recommended for exclusive pumping/expressing?
For exclusive pumping, we highly recommend the Original Night Owl V2 and Mumma Owl models.
These stand out due to their advanced motor performance. The powerful suction (hospital grade level) capabilities and customisable settings make them well-suited for
extended pumping sessions, providing comfort and efficiency for those who choose to exclusively pump.
How do The Night Owl pumps enhance the exclusive pumping experience?
The advanced motor technology and higher suction levels in the recommended models for exclusive pumping (Original Night Owl V2 and Mumma Owl) allows for efficient milk expression, reducing pumping time while maintaining comfort and freedom. Customisable settings provide flexibility to adapt
to your specific needs, ensuring a personalised and effective pumping
routine for exclusive pumping mums.
Can I trust The Night Owl pumps for long-term use?
Absolutely. All night owl pumps are built to withstand long-term, frequent use. We prioritise durability and quality to ensure that your pumping journey remains smooth and reliable over time.
How strong is the suction?
The Night Owl Original V2 pump operates at up 300 mmHg which is in line with larger Hospital Grade pumps. There's 12 levels of suction however the maximum level doesn't necessarily mean a higher milk output. It's very rare that our mums actually use the pump to the maximum suction level as it is very strong - the most important thing is having the right size flange, how the modes are used and how comfortable you are!
Is the suction 'too strong' that it'll hurt?
No absolutely not! The Night Owl pumps have a lot of levels to choose from, so the suction power is split up comfortably - that way you can easily tailor to your personal comfort level. The most gentle of the 3 is the Mumma Owl, however all are gentle as we've designed them to be.
If it 'hurts' that means you either have the level up too high, or an incorrect size.
Are they 'Hospital Grade'?
Although there aren't any official standards in Australia for what 'hospital grade' is defined as - hospital grade suction is generally classified as 300-350 mmHg in the world of breast pumps. Our Mumma Owl and Original Night Owl V2 measure at 300mmHg so they're more than powerful enough, and YES they fall into the 'hospital grade' category.
There's also a significant number of levels of suction, however the maximum level doesn't necessarily mean a higher milk output. It's very rare that our mums actually use the pump to the maximum suction level as it is very strong - the most important thing is having the right size flange, how the modes are used and how comfortable you are!
Are your pumps a 'closed system' / have an 'anti-backflow protector'?
It's important to consider whether you're purchasing a pump with an 'open' or 'closed' system.
All of our night owl pumps have a 'closed system'. This means that there is a barrier between the parts that touch your breast milk, and the pump motor. This is called the back flow protector, or i.e. the diaphragm.
A closed system is important as it prevents your breast milk from being contaminated.
If a pump has an 'open system' this means that they do not have barriers between the parts that touch your breast milk and the tubing, pump motor etc. This allows moisture from pumping to enter any tubing or the motor, where there is the risk of being hidden mould, which will then come into contact with your breast milk - therefore contaminating it and making it unsafe for your baby to drink.
Want to find out more? Head over to our FAQ page to get answers to our most frequently asked questions!
Want to be the first to know about all new Night Owl products and sales?
Join The Night Owl community and we will keep you up date with the latest news, offers and give you the chance to find out about our latest and greatest products!